Flanges

4" Flange handling - Step by step

1. Cleaning the flange parts. Use Lint-free paper and Alcohol based solvent

      

2. Blade mounting on the front flange

3. Back flange mounting

Slide back flange on top of the front flange until fits into place

4. Bushing mounting

Parts may need a slight movement to allow insertion of the bushing into both, front and back flanges

5. Flip over the flange for nut assembly

Before                                              After

6. Mount the flange assembly onto the mounting base

The bushing pins have to match the holes in the base

7. Install and tighten the flange nut by using the Torque meter and the Nut adaptor

8. Torque the nut on the flange

View Related Products

Single Blade Flange Sets 40 mm Blade I.D. (1.575")
Single Blade Flange Sets 88.82 mm Blade I.D. (3.497")
Any round object that rotates at any given speed per minute causes some vibrations due to asymmetric mass distribution. At higher speed, the vibration phenomenon is being accelerated.
ADT offers special features for our flanges to support your process needs.